Eversolo has officially lifted the curtain on the DAC-Z10, a high-end digital-to-analog converter that also doubles as a preamplifier and headphone amplifier. If the name sounds familiar, that’s because the DAC-Z10 was first shown earlier this year at High End Munich 2025, alongside Eversolo’s new Play streamer and T8 transport. Now that it’s finally been detailed, the DAC-Z10 looks like a serious all-in-one option for anyone building a high-performance two-channel setup.

At the center of the DAC-Z10 is Eversolo’s “Fully Isolated Architecture” or FIA. What that means in practice is that the digital and analog sections inside the unit are physically separated. Eversolo has gone as far as giving the left and right channels their own linear power supplies and their own signal paths—essentially building two DACs into one chassis.

Each side uses a dedicated pair of AKM chips (AK4191 and AK4499), which helps reduce crosstalk between channels and keeps the sound clean. It also supports ultra-high-resolution audio: up to DSD512 and PCM 768 kHz/32-bit. On paper, it hits some pretty high marks, like a THD+N of 0.00008% and a dynamic range of 130 dB.

One thing that stands out about the DAC-Z10 is how it handles volume. Instead of relying on digital volume adjustments (which can lose detail at lower levels), Eversolo uses a physical resistor ladder network—called an R2R network—for each channel. This type of setup adjusts volume in the analog domain, which helps maintain signal accuracy whether you’re listening quietly or blasting your favorite record.

This volume system pairs up with a fully balanced preamp stage that includes both XLR and RCA analog inputs and outputs. With +10 dB of gain available, you can plug this directly into a power amplifier or active speakers and skip using a separate preamp entirely.

For digital-to-analog conversion, timing is everything—and Eversolo hasn’t cut corners here. The DAC-Z10 uses an OCXO (oven-controlled crystal oscillator), which helps keep the internal clock stable despite temperature changes. It also includes phase-locked loop (PLL) tech and an FPGA-based system for clock signal cleanup.

If you’re already using an external master clock in your system, you’ll appreciate that the DAC-Z10 supports both 10 MHz and 25 MHz clock inputs, with selectable impedance (50 Ω or 75 Ω) for flexibility. This makes it easier to integrate the DAC-Z10 into more advanced or professional setups.

The DAC-Z10 isn’t short on ways to connect. On the digital side, it includes USB Audio, dual coaxial and optical inputs, AES/EBU, HDMI ARC/eARC, and IIS with eight selectable pin configurations. All of these inputs are electrically isolated, which helps prevent noise and ground loop issues.

There’s also built-in Bluetooth via Qualcomm’s QCC5125 chip, supporting high-quality codecs for wireless playback. If you want to use the DAC-Z10 as part of a home theater setup, the HDMI ARC input lets you hook it up to a TV and pull audio directly into your hi-fi system.

For headphone users, the DAC-Z10 includes a single 6.35 mm output that automatically adjusts gain based on your headphone’s impedance. It delivers up to 1 W into both 16 Ω and 32 Ω headphones, which should be enough for everything from IEMs to planar magnetic over-ears. However, there’s no balanced headphone output—no 4.4 mm Pentaconn or 4-pin XLR—so if your headphones are wired for balanced use, you’ll need an adapter.

The front of the unit is dominated by a large 8.8-inch IPS touchscreen. It’s more than just eye candy—it gives you full control over the DAC-Z10’s settings and lets you choose from different spectrum analyzers and VU meter styles. You can also tweak the LED ring around the volume knob to match your setup’s lighting. And if you’d rather not leave your chair, the Eversolo Control app gives you full remote control from your phone or tablet.

Whether you're upgrading your DAC, downsizing your system to a single box, or just looking for a feature-rich front end for your two-channel setup, the DAC-Z10 is clearly aiming to be a versatile and high-performance option. Its blend of dual-mono DAC chips, analog volume control, flexible inputs, and integrated headphone amp makes it one of the more technically interesting components Eversolo has introduced so far.

The DAC-Z10 is priced at $1,980 USD / €1,980. There’s no firm shipping date yet, but Eversolo says that details are coming soon. The Eversolo Play and Eversolo T8, however, are both available at Amazon now for $799 and $1,380, respectively.